Bleach Logo Font Generator

Celebrate the Bleach Series Finale with your Own Custom Logo

Put your own name in the Bleach logo – using the iconic custom font recognized across the world. Type a word or a name and it’s set in the red Bleach letters with the white and blue outline, the flames on each side and the red bars underneath. Add a second line in place of ブリーチ, in English or Japanese, and download it in high resolution with your choice of background image.

Bleach logo generator preview

For exclusive early access to new album generators, please join our free mailing list. No spam or ads, just simple email alerts when new generators are created.

Heavy red letters, a white and blue outline, two flames curling up on either side, and a pair of speed lines underneath with ブリーチ between them: you can spot the Bleach title from across a room. It has the look of something painted on the side of a race car, which is a fair match for a series about teenagers swinging enormous swords.

With this generator you can swap in your own words. Whatever you type is set in a custom font designed for this generator, then wrapped in the outlines, flames and red bars of the original. A second box fills the spot where the katakana sits, in English or Japanese. Each image comes out at 2400 by 2400 pixels, plenty for a profile picture, a banner, a poster or a print.

Any name, same attitude The original at the top left, then a few characters. The bars and flames shift to fit each name, so short words and long ones both hold together.

Bleach, From Weekly Shōnen Jump to the 2026 Series Finale

Tite Kubo's manga began in Weekly Shōnen Jump in August 2001 and wrapped up 15 years later, after 74 volumes. Its hero, Ichigo Kurosaki, is a teenager who can see ghosts. When a Soul Reaper named Rukia Kuchiki is hurt protecting him from a Hollow, a monster that feeds on souls, she passes her powers to him and he inherits her job. Swords called zanpakutō, each with a name and a spirit of its own, do most of the talking from there, and the strongest fighters can release a final form known as a Bankai.

During the 2000s it was one of Jump's three biggest series, next to One Piece and Naruto. Studio Pierrot's anime ran for 366 episodes on TV Tokyo from 2004 to 2012, then stopped short of the manga's last arc, and fans waited a decade for the rest.

That wait ended with Thousand-Year Blood War, which began in October 2022 and came out in four parts. The 50th and last episode aired in Japan on October 27, 2026, closing out an anime that first went on the air almost 22 years earlier. Its title, "Death & Strawberry", comes from the very first chapter of the manga,, a nod back to where it all began.

Why Is the Series Called Bleach?

It's an odd name for a story about ghosts and swords, and the explanation comes down to color. Kubo's first idea was Black, after the robes Soul Reapers wear, but he felt that was too plain. White had the same problem. Bleach got around it, since it's what you'd use to turn black cloth white, and the word brings both colors to mind without naming either. Japan uses the same English word, written in katakana as ブリーチ and pronounced something like "buriichi".

What Font Does Bleach Use? The Story Behind Our Custom Font

You won't find it in a font menu. The title appears to be custom lettering made for the series, and we couldn't find any record of an official typeface. That's common with anime, where titles like AKIRA and Dragon Ball tend to be drawn rather than typeset. The free "Bleach" fonts floating around online are fan work.

So the main text here uses a Bleach custom font made just for this generator, based on the letterforms of the original. Every name gets the same wide, squared-off curves and hard slant. Capitals like the B have a long foot reaching out to the left, as the real one does, and the lowercase letters are the same shapes without it. That's the trick behind "Bleach" with a single capital looking so close to the original. All capitals work too, though those feet will overlap more.

Two free Google Fonts handle everything else. Russo One sets the second line, slanted and always in capitals, because its heavy squared shapes sit comfortably next to the blocky katakana. Japanese uses Dela Gothic One, widened slightly to match the flat, wide characters in the original.

Red Letters, Blue Outlines and Flames: How the Title Is Put Together

Where the JoJo's Bizarre Adventure logo gets its drama from bending in perspective, this one stays flat and relies on layers. Flat, bright red comes first. A thin white outline goes around the letters and a thick blue one around that, both with sharp corners. That blue is one gradient across the whole design, from light cyan at the flame tips to dark navy along the bottom, which is why all the parts feel like one piece.

Under the letters, two red bars run outward from the text. Each has a rounded corner at one end and a sharp point at the other, and they sit on a blue banner with stepped ends. Behind it all are the flames, white with a blue line around them, the right one a mirror image of the left. They were traced from the original and refined by hand as vector shapes, so they stay crisp at any size.

Four layers, one title Red letters, then the white outline, then the blue outline with its banner and bars, and last the flames and second line.

Your text goes through those same steps in the same order. One detail took some working out: when two outlines nearly touch, they can trap a small pocket between letters, like the notches of an E beside the next letter. The generator finds those pockets and fills them with the same blue, so the outline stays solid no matter which letters land side by side.

Fitting Long Names and a Second Line Between the Red Bars

A wide, short design like this gets small fast when a long name has to fit in a square. To avoid that, the first line tries one, two and three rows, breaking at spaces, and keeps whichever gives the biggest letters, with a slight preference for fewer rows. The flames grow a little with each extra row so they don't look lost beside a taller block of text. Long hero names are common in shōnen series, and My Hero Academia has a generator of its own if that's more your world.

Below that, the second line sits between the red bars, and they shorten to make room. Too long to fit? It shrinks a little, then moves onto a new row instead of turning tiny, up to three rows, each with its own pair of bars. "Thousand-Year Blood War" stays perfectly readable that way. Either box can also stay empty: the first line alone gets two unbroken red bars, and the second line alone sits between the flames with nothing above it.

Longer text, more rows Both lines break by themselves, and every row of the second line brings its own red bars.

Writing in Katakana and Kanji With the Japanese Font

Both boxes accept Japanese, and for the second line it's the most authentic choice. You could write your name in katakana as the original does, or borrow a term from the series: 死神 is shinigami, the Japanese word for Soul Reaper, 斬月 is Ichigo's sword Zangetsu, and 千年血戦篇 is the Thousand-Year Blood War arc. Japanese leans at the same angle as everything else. Those font files only download once you type something in Japanese, and only the ones covering your characters, so nobody else has to wait for them.

Japanese on either line The original katakana, a couple of terms from the series below the letters, and Ichigo's full name in kanji up top.

How to Use the Bleach Font Generator

Start with the first box. A capital followed by lowercase comes closest to the original, and the shorter the name, the bigger the letters. Add a second line if you'd like one, then choose from five backgrounds: the main cast in a dark group shot, Gin Ichimaru against a deep blue sky, a burst of blue light behind Ichigo and friends, a plain blue sunburst, or open sky above the clouds.

Press Generate and your design appears above the boxes. Happy with it? Download saves a high-resolution JPG.

Ideas for Soul Reaper Names, Squads and Banners

Your own name is the natural first try, maybe with your squad underneath or your zanpakutō's name in Japanese. From there, name your Bankai, make a badge for a cosplay group, or dress up a Discord server or stream banner with a farewell to the series. If your group chat argues about Dragonball Z power levels or Digimon partners instead, we've got those covered too. The flames and bars frame whatever you put in the middle, so it also works for things with no connection to anime at all, like a gym, a band or a fantasy football team.

TRY OUR OTHER

Logo & Font Generators:

Notify me
Let me know:
guest
0 Comments
Oldest
Newest Most Voted